Maine Boat Builders Show • March 24/25/26 2017

News

A gathering of the finest fiberglass and wooden custom boat builders on the East Coast. Also exhibiting numerous manufacturers of boating equipment. Sailboats, powerboats, canoes, kayaks, and rowing boats with the builders there to discuss and sell their work. The show times for the 2017 Maine Boat builders are: Friday March 24, 10-6pm Saturday March…

ZoomDetails

Wilbur 46′

Wilbur Yachts is a custom boatyard with a staff and crew trained to respond to the individual needs of discriminating clientele. Our dedication to personal need is no better exemplified than in the Wilbur/Newman 46, a seaworthy boat for pleasure and commercial use alike. Over the last 30 years Lee S. Wilbur & Co. has…
Our Boats
ZoomDetails

Wilbur 42′

A few years ago, Dick Avery, of Avery's Boathouse and Charter in St. Thomas, USVI, set out to design a perfect cruising boat for a couple whom might have occasional guests. Calling on their many years of experience in the charter business, Dick Avery and his wife Marianne designed and built their dream boat, "Cranberry…
Our Boats
ZoomDetails

Wilbur 38′

The Wilbur 38’ is a solid, soft chine semi-displacement hull. This hull offers the best of both worlds—sea keeping ability with a moderate speed. The wide beam of this boat offers a lot of room.   Fiberglass Specifications This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of…
Our Boats
ZoomDetails

Wilbur 61′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 1 1/2" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity…
Our Boats
ZoomDetails

Wilbur 31′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 3/4" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and…
Our Boats
ZoomDetails

Wilbur 34′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 3/4" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and…
Our Boats