Portfolio Archives: Our Boats

Wilbur 37′ Weekender

Specs: Length: 37'0" LWL: 34'2" Beam: 10'7" Draft: Engines up 26" Engines Down: 36" Weight: 14,200 lbs. Water: 80 gallons Fuel: 425 gallons Hull: True Deep V VESSEL CONCEPT   This high performance, infused foam cored light weight V bottom hull is a true “Weekender” offering today’s outboard speeds.  The vessel is designed to allow…

Wilbur 46′

Wilbur Yachts is a custom boatyard with a staff and crew trained to respond to the individual needs of discriminating clientele. Our dedication to personal need is no better exemplified than in the Wilbur/Newman 46, a seaworthy boat for pleasure and commercial use alike. Over the last 30 years Lee S. Wilbur & Co. has…

Wilbur 42′

A few years ago, Dick Avery, of Avery's Boathouse and Charter in St. Thomas, USVI, set out to design a perfect cruising boat for a couple whom might have occasional guests. Calling on their many years of experience in the charter business, Dick Avery and his wife Marianne designed and built their dream boat, "Cranberry…

Wilbur 38′

The Wilbur 38’ is a solid, soft chine semi-displacement hull. This hull offers the best of both worlds—sea keeping ability with a moderate speed. The wide beam of this boat offers a lot of room.   Fiberglass Specifications This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of…

Wilbur 61′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 1 1/2" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity…

Wilbur 31′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 3/4" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and…

Wilbur 34′

Fiberglass Specifications: This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 3/4" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and…